The maximum number of products to compare is 4.
You can only compare products from the same category.
Would you like to remove all products from the comparison tool and add this one instead?
Power and precision in industrial welding
SPARTUS EasyMIG 500DP is a modern three-phase industrial-grade inverter welder designed for demanding applications. It uses advanced IGBT transistors and Dual Pulse technology, ensuring top-quality welds with maximum control over the process. A reliable power source for production, workshop, and industrial environments.
MIG/MAG welding — synergy and precise control
The unit features a synergic MIG/MAG welding system with programs for carbon steel, stainless steel, aluminum, and gasless welding.
The operator can use modes such as 2T/4T, Pulse, Dual Pulse, Cool Pulse, Slow Feed, as well as inductance adjustment from -10 to +10.
A dedicated 4-roller wire feeder ensures perfectly stable wire feeding, even at high currents.
The synergic system automatically adjusts wire feed speed to voltage, while the operator can fine-tune voltage and arc characteristics. Pre-gas and post-gas settings are also available to improve weld cleanliness and appearance.
MMA and Lift TIG welding
EasyMIG 500DP also enables MMA and Lift TIG welding.
For MMA welding, the following support functions are available:
- Hot Start – easier arc ignition
- Arc Force – stabilizes the arc
- VRD – reduced open-circuit voltage for increased safety
Lift TIG mode allows precise welding of thin materials without HF ignition — ideal for production and repair shops.
Synergic programs
SPARTUS EasyMIG 500DP is equipped with integrated synergic programs that automatically adjust parameters to the selected wire and shielding gas.
This greatly reduces setup time and ensures repeatability and optimal results in every welding cycle.
| MATERIAL | PROCESS | SHIELDING GAS | WIRE DIAMETER |
|---|---|---|---|
| CARBON STEEL | MIG DC | 100%CO2 | 0.8 – 1.6mm |
| CARBON STEEL | MIG DC | 75%Ar + 25%CO2 mixed gas | 0.8 – 1.6mm |
| FLUX CORE | MIG DC | – | 0.8 – 1.6mm |
| CARBON STEEL | Pulse / Dual Pulse | 80%Ar+20% CO2 mixed gas | 0.8 – 1.2mm |
| STAINLESS STEEL | Pulse / Dual Pulse | 80%Ar+20% CO2 mixed gas | 0.8 – 1.2mm |
| STAINLESS STEEL | Pulse / Dual Pulse | 97,5%Ar+2,5% CO2 mixed gas | 0.8 – 1.2mm |
| CuSi | Pulse / Dual Pulse | 100% argon | 0.8 – 1.2mm |
| AlSi | Pulse / Dual Pulse | 100% argon | 1.0 – 1.2mm |
| AlMg | Pulse / Dual Pulse | 100% argon | 1.0 – 1.2mm |
Intuitive control and LCD panel
The advanced LCD interface with dual function knobs provides convenient navigation and precise parameter adjustments.
The feeder panel includes buttons for wire test, gas test, operating mode selection, and 2T/4T settings. The built-in display presents key welding data in real time.
Operation is smooth and intuitive — designed for maximum operator comfort.
Memory channels — fast recall of settings
The unit offers 6 memory channels, allowing users to save and instantly recall parameter sets.
This is especially useful for serial production or frequent changes of material and wire diameter.
Industrial construction and mobility
SPARTUS EasyMIG 500DP is a high-performance power source with integrated water cooling, mounted on a stable transport cart.
The construction is designed for continuous operation under heavy load. The built-in cooler and protection systems against overheating and overload ensure reliability even in harsh industrial environments.
Equipment
Welders from the SPARTUS Easy series are supplied only as complete sets — ready to work immediately.
Package equipment:
• EasyMIG 500DP
• separated wire feeder 4R
• cooler
• driving set
• MaxCoolant – cooling liquid
• cable connection set 5m
• MIG gun SPE 501 3m
• graphite wire liner
• steel linear
• 4 x guide roller 1.0 – 1.2U fi37 + additionally 2 x guide roller 0.8 – 1.0V fi37, 2 x guide roller 1.2 – 1.6V fi37, 2 x drive roller fi37
• 3m work clamp with screw clamp
• user’s manual
SPARTUS EasyMIG 500DP is a powerful industrial welding source with Dual Pulse technology, a 100% duty cycle, and a wide adjustment range. It combines high performance, intelligent control, and exceptional durability, ensuring perfect results in every process — MIG, MMA, or Lift TIG.
An ideal choice for production, steel structures, and repair workshops.
